19X15W Led Wash Moving Head Light

    The MAC Aura is an award-winning wash light that lighting designers have turned to the world over due to its versatility as a powerful beam and wash luminaire of the highest caliber. The result of out-of-the-box creative thinking, it is the first LED moving head wash light to combine multicolor beam LEDs with a backlight LED array that takes the synthetic look out of LED wash lights.


FEATURES

*Single-lens wash with fully premixed color

Broad color palette, RGBW color mixing
Eye-candy Aura Effects™
Uniform shades
Built-in FX engine11 to 58° zoom
3850 Lumens output
Rapid movement
Compact, low weight design (5.6 kg)
High efficiency, low power consumption, long lifetime


SPECIFICATIONS


PHYSICAL

Length: 302 mm (11.9 in.) across yoke
Width: 302 mm (11.9 in.) across yoke
Height: 360 mm (14.2 in.), head straight up
Weight: 5.6 kg (12.4 lbs.) without accessories

DYNAMIC EFFECTS
Beam color mixing: RGBW
Aura (secondary lens array illumination) color mixing: RGB
Beam color temperature control: CTO, variable 10 000 - 2500 K
Beam and aura electronic "color wheel" effect: 33 LEE-referenced colors plus white, variable-speed color-wheel rotation effect and random color
Beam and aura independent shutter effects: Electronic, with regular and random pulse, burst and strobe effects
Pre-programmed effects: Range of synchronized and independent beam and aura FX, different FX can be combined
Electronic dimming: Independent beam and aura, four dimming curve options
Pan: 540°
Tilt: 232°
Pan and tilt speed: Adjustable via onboard control panel and DMX

CONTROL AND PROGRAMMING

Control options: Independent control of beam (primary output) and aura (secondary lens array illumination)
Macro programs selectable via DMX: Synchronized beam and aura effects
Control: DMX
RDM: Implemented
Control resolution: 8-bit, with 16-bit control of pan & tilt
Setting and addressing: Control panel with backlit graphic display
DMX channels: 14/25
DMX compliance: USITT DMX512-A
RDM compliance: ANSI/ESTA E1.20
Transceiver: RS-485
Fixture software update: Via DMX with Martin™ USB Duo DMX Interface Box

OPTICS

Zoom range: 11° - 58°
Peak angle: One-tenth
Light source: 19x 10W RGBW LED Array System
LED refresh rate: Beam 1220 Hz, Aura 4395 Hz
Minimum LED lifetime: 50,000 hours (to >70% luminous output)*
*Figure obtained under manufacturer´s test conditions

PHOTOMETRIC DATA

Total output: 3850 lumens (zoom at maximum)

CONSTRUCTION

Housing: High-impact flame-retardant thermoplastic
Color: Black
Protection rating: IP20

INSTALLATION

Mounting points: One M12 threaded hole for rigging clamp
Location: Indoor use only, must be fastened to surface or structure
Orientation: Any
Minimum distance to combustible materials: 100 mm (4.0 in.)
Minimum distance to illuminated surfaces: 200 mm (7.9 in.)

CONNECTIONS

AC power input: Neutrik PowerCon
AC power throughput: Neutrik PowerCon
DMX and RDM data in/out: 5-pin locking XLR

ELECTRICAL

AC power: 100-240 V nominal, 50/60 Hz
Power supply unit: Auto-ranging electronic switch mode
Main fuse: 5 AT (slow blow)
Typical power consumption, all effects static, zero light output: <15 W
Maximum total power consumption: 260 W

TYPICAL POWER AND CURRENT

100 V, 60 Hz: 236 W, 2.4 A, PF 0.994
120 V, 60 Hz: 234 W, 2.0 A, PF 0.992
208 V, 60 Hz: 229 W, 1.2 A, PF 0.970
230 V, 50 Hz: 228 W, 1.1 A, PF 0.959
240 V, 50 Hz: 228 W, 1.0 A, PF 0.953
Measurements made at nominal voltage with all LEDs at full intensity. Allow for a deviation of +/- 10%.

THERMAL

Cooling: Forced air (temperature-regulated, low noise, user-definable levels)
Maximum ambient temperature (Ta max.): 40° C (104° F)
Minimum ambient temperature (Ta min.): 5° C (41° F)
Total heat dissipation (calculated, +/- 10%): 880 BTU/hr.

APPROVALS

EU safety: EN 60598-2-17 (EN 60598-1), EN 62471
EU EMC: EN 55103-1, EN 55103-2, EN 55015, EN 61547
US safety: UL 1573
US EMC: FCC Part 15 Class A
Canadian safety: CSA E598-2-17 (CSA E60598-1)
Canadian EMC: ICES-003 Class A
Australia/NZ: C-TICK N4241



TOP